Pride Mobility Zolar Manuel De L'utilisateur page 11

TILLER CONSOLE: LCD CONTROL PANEL
The tiller console and lower tiller house all of the controls needed to drive your scooter, including the LCD control
panel, throttle control levers, key switch, and the throttle control lever switch. See fi gure 3.
PROHIBITED! Do not expose the tiller console to moisture. In the event that the tiller console
does become exposed to moisture, do not attempt to operate your scooter until the tiller console
has dried thoroughly.
Horn Buttons
These buttons activate a warning horn. Your scooter
must be powered up for the horn to be operational. Do
not hesitate to use the warning horn when doing so
may prevent accident or injury.
Turn Signal Buttons
 Press the appropriate turn signal button once to
activate it. The turn signal will fl ash on the LCD
screen.
 Press the same signal button to turn it off .
NOTE: The turn signals are timed to shut off after
15 seconds. A warning beep will sound as long as the
turn signal is on. See fi gure 5 for volume control.
Lights Button
 Press the lights button once to activate the lighting
system. The light symbol will be shown on the
LCD screen.
 Press the lights button again to turn the lighting
system off .
WARNING! Scooter users are required
to use their lights when visibility is
restricted—day or night.
LCD Screen and Control Panel Settings
The LCD control panel off ers easily intuited feedback
information via the LCD screen. See fi gure 3. The
LCD screen is also used during the set-up (activation)
of the various control panel settings.
Full-size Scooter Series
I I . Y O U R S C O O T E R
IDENTIFICATION KEY
1. HORN BUTTON
2. TURN SIGNAL BUTTONS
3. LIGHTS BUTTON
4. LCD SCREEN
5. SET BUTTON
6. HAZARD LIGHTS BUTTON
7. MODE BUTTON
5
4
3
2 1
11
Figure 3. LCD Control Panel - Style B
8. HI-LOW BUTTON
9. SPEED ADJUSTMENT
(INCREASE)
10. SPEED ADJUSTMENT
(DECREASE)
11. THROTTLE CONTROL
6
7
8
9
10 1
2
11