Pride Mobility Zolar Manuel De L'utilisateur page 15

Maximum Speed Indicator
The maximum speed indicator displays the maximum
speed selected with the speed adjustment buttons. The
more bars that are lit, the faster the speed. The maximum
scooter speed will be determined by the HIGH-LOW
setting, which limits the maximum speed to half when
set to LOW. The actual travel speed will be shown in
the speed display on the LCD screen.
Volume Control
Turn signals, hazard lights, low voltage, and error
messages can be set to both blink and beep. The horn is
relay operated and its volume cannot be adjusted. See
fi gure 5.
To set the volume:
1. Ensure the key is in the "off " position.
2. Press the appropriate two buttons simultaneously
(see chart 3), and turn the key to the "on" position.
3. Once the volume control screen appears, release the
buttons.
4. Press the hare button to increase the volume to a
value of 4 and the tortoise button to decrease the
volume of the beep to 0 (0 indicates off and 4
indicates the loudest volume).
5. To exit, press any button except the hare or tortoise.
NOTE: The error message language option is set the
same way as the volume.
FUNCTION
Hazard Lights SET + HAZARD LIGHTS
Low Voltage SET + LEFT TURN INDICATOR
Turn Signals SET + RIGHT TURN INDICATOR SET 4
Error Message SET + LIGHTS
Language
Option
Chart 3. Volume Control Information
Full-size Scooter Series
I I . Y O U R S C O O T E R
BUTTONS
SET 1
SET 3
SET 5
6 - Spanish
5 - Italian
4 - French
3 - German
2 - Dutch
1 - English
0 - Close
IDENTIFICATION KEY
1. VOLUME/LANGUAGE OPTION
2. FUNCTION INDICATOR
1
2
Figure 5. Volume Control Display
FUNCTION INDICATOR
15