Pride Mobility Zolar Manuel De L'utilisateur page 12

Hazard Lights Button
This button activates the 4-way yellow fl ashers on your scooter.
 Press the button once to turn on the fl ashers.
 Press the button again to turn off the fl ashers.
NOTE: The 4-way fl ashers will fl ash and a warning beep will sound as long as the hazard lights are on. See
fi gure 5 for volume control.
Mode Button
Use the mode button to scroll between the odometer, tripometer, temperature, and clock.
High-Low Button
This button toggles the scooter's speed between HIGH and LOW.
 Press the High-Low button once to set the speed adjustment to High. The High-Low indicator will display on
the LCD screen. See fi gure 4. Using this setting in conjunction with the speed adjustment buttons will allow
the scooter to achieve speeds up to the maximum preprogrammed speed for the scooter.
 Press the High-Low button again to set the speed adjustment to Low. The High-Low indicator will not display
on the LCD screen. Using this setting in conjunction with the speed adjustment buttons will allow the scooter
to achieve speeds up to the half the maximum preprogrammed speed for the scooter.
Speed Adjustment Buttons
These adjustment buttons enable you to pre-select and limit your scooter's speed. This is indicated by the maximum
speed indicator on the LCD screen. See fi gure 4.
 Press the image of the tortoise to decrease the speed of the scooter.
 Press the image of the hare to increase the speed of the scooter.
NOTE: The more bars shown on the maximum speed indicator, the faster your pre-selected maximum speed
will be. See fi gure 4.
Throttle Control Levers
These levers allow you to control the forward speed and the reverse speed of your scooter up to the maximum
speed you preset with the speed adjustment buttons. A throttle control lever is located on the underside of the left
and right side of the tiller handle. See Figure 3.
To Move Forward:
 Squeeze the rear part of the throttle control lever.
To Move Rearward:
 Squeeze the front part of the throttle control lever.
Release the throttle control lever and allow your scooter to come to a complete stop before engaging the other side
of the lever. When the throttle control lever is completely released, it automatically returns to the center "stop"
position and engages your scooter's brakes.
12
I I . Y O U R S C O O T E R
Full-size Scooter Series