schmersal SD-I-U Serie Instructions De Montage page 24

Montage- und Anschlussanleitung / UNIVERSAL-Gateway für serielle Diagnose
Mounting and wiring instructions / UNIVERSAL gateway for serial diagnostics
Instructions de montage et de câblage / Passerelle UNIVERSEL pour diagnostic série
Front View
Modbus/TCP
# Item
1 Network Status LED
2 Module Status LED
3 Link/Activity
4 Ethernet Interface
Network Status LED
Note: A test sequence is performed on this LED during startup.
LED State
Off
Green
Green, flashing
Red
Red, flashing
Module Status LED
Note: A test sequence is performed on this LED during startup.
LED State
Off
Green
Red
Red, flashing
LINK/Activity LED
LED State
Off
Green
Green, flickering
Ethernet Interface
The ethernet interface supports 10/100Mbit, full or half duplex operation.
1
Description
No power or no IP address
Module is in Process Active or Idle state
Waiting for connections
Duplicate IP address, or FATAL event
Process Active Timeout.
Description
No power
Normal operation
Major fault; module is in state EXCEPTION (or FATAL event)
Minor fault; the present IP settings differs from the settings in the net.cfg.ob
Description
No link, no activity
Link established
Activity
About the Anybus-CompactCom Modbus/TCP 1-2
1 8
2
4
3
SD-I-U-...
24 / 28