Front View; Ethernet Interface - schmersal SD-I-U Serie Instructions De Montage

Montage- und Anschlussanleitung / UNIVERSAL-Gateway für serielle Diagnose
Mounting and wiring instructions / UNIVERSAL gateway for serial diagnostics
Instructions de montage et de câblage / Passerelle UNIVERSEL pour diagnostic série

Front View

PROFINET IO
# Item
1 Network Status LED
2 Module Status LED
3 Link/Activity LED
4

Ethernet Interface

Network Status LED
Note: A test sequence is performed on this LED during startup.
LED State
Off
Green
Green, flashing
Module Status LED
Note: A test sequence is performed on this LED during startup.
LED State
Off
Green
Green, 1 flash
Green, 2 flashes
Red
Red, 1 flash
Red, 2 flashes
Red, 3 flashes
Red, 4 flashes
LINK/Activity LED
LED State
Off
Green
Green, flickering
Ethernet Interface
The ethernet interface operates at 100Mbit, full duplex, as required by PROFINET.
1
Description Comments
Offline - No power
- No connection with IO Controller
Online (RUN) - Connection with IO Controller established
- IO Controller in RUN state
Online (STOP) - Connection with IO Controller established
- IO Controller in STOP state
Description Comments
Not Initialized No power - or - Module in 'SETUP' or 'NW_INIT' state
Normal Operation Module has shifted from the 'NW_INIT' state
Diagnostic Event(s) Diagnostic event(s) present
Blink Used by engineering tools to identify the node on the network
Exception Error Module in state 'EXCEPTION'
Configuration Error Expected Identification differs from Real Identification
IP Address Error IP address not set
Station Name Error Station Name not set
Internal Error Module has encountered a major internal error
Description Comments
No Link No link, no communication present
Link Ethernet link established, no communication present
Activity Ethernet link established, communication present
About the Anybus-CompactCom PROFINET IO 1-2
1 8
2
4
3
SD-I-U-...
19 / 28