Assembly - Marshalltown Bullet 930-RCT-PC Mode D'emploi

Q
Step 1 – Lay out all of the parts
A. Table Assembly
B. Power Assembly
C. Long Side Rail
D. Long Side Tail
E. Short Side Tail
F. Short Side Rail
G. Casters (x2)
H. Handle Assembly
I. Handle Extension
J. 8mm x 80mm PH Phillips Machine Screws (x4)
K. 8mm x 25mm PH Phillips Machine Screws (x4)
L. Allen Wrench
M. #10 x 1 PH Phillips Self Tapping Screws (x4 for 930-RCT-PC, x6 for 940-RCT40)
N. 6mm x 16mm PH Phillips Machine Screws (x8)
O. Hone Stone
P. M8 Star Washers (x4)
Q. Angle Guide
R. Phillips Screwdriver (not included)
S. Middle Tail (940-RCT40 only)
Step 2 – Connect the Long Side Rail (C) to the Long Side Tail (D) using
two Machine Screws (K)
Step 3 – Connect the Short Side Rail (F) to the Short Side Tail (E) using
two Machine Screws (K)
WS2646
104 S. 8th Ave. Marshalltown, IA Phone 800-888-0127 / 641-753-0127 • Fax 800-477-6341 / 641-753-6341 www.MARSHALLTOWN.com

ASSEMBLY

5 of 18