Assembly - Marshalltown TC17 Mode D'emploi

Thank you for purchasing the MARSHALLTOWN 17" (432mm) Tile Cutter. This innovative Tile Cutter allows you
to make quick, clean, score-and-snap cuts.
Other features of your Tile Cutter include:
• Two rod sliding system with smooth operation
• Handle with comfortable grip
• 1/2" (12mm) cut thickness
• Diagonal cutting on tiles up to 12" x 12" (305mm x 305mm)
This Tile Cutter can cut tile up to 1/2" (12mm) thick and 17" (432mm) long, including:
• Ceramic Tile
• Glass Tile
• Mosaic Tile*
*Does not cut flexible backing to mosaic tile products
This owner's manual provides the information needed to operate and maintain this Tile Cutter. Carefully
read and follow all safety and operating instructions in this manual. Ensure every operator of this Tile Cutter
reads this manual before operating the unit. The replacement of any part on this Tile Cutter by other than the
manufacturer's authorized replacement part may adversely affect the performance, durability, or safety of the
product.
Be sure safety precautions are observed. Read and follow all safety and operating instructions in this
operator's manual. The manufacturer reserves the right to make changes on or add improvements to its
product at any time without prior notice or obligation. The manufacturer reserves the right to decide, upon its
sole discretion and at any time, to discontinue this product.
This manual covers the MARSHALLTOWN 17" (432mm) Tile Cutter. For technical questions or repair parts,
please call MARSHALLTOWN customer service at 1-800-888-0127 or visit www.MARSHALLTOWN.com.
Your Tile Cutter comes partially assembled and may or may not require the following assembly steps before it is
ready for use.
1. Loosen the knob and attach the ruler into groove of the graduation ruler.
2. Tighten in place with the knob.
2 of 8
104 S. 8th Ave. Marshalltown, IA Phone 800-888-0127 / 641-753-0127 • Fax 800-477-6341 / 641-753-6341 www.MARSHALLTOWN.com
INTRODUCTION

ASSEMBLY

WS2769