Eu Declaration Of Conformity - TESY CN04 Notice D'utilisation

Thank you for your trust as a consumer which you have granted to us by purchasing the electrical appliance with a built-in wireless communication module. The
only condition for using the inbuilt wireless communication module in TESY appliances is to have a device which is able to connect to Wi-Fi networks, and has a
reliable Web browser and internet connection.
Product
Model Name
Frequency range
Rated RF output power
Number of channels
Separation between channels
Modulation type
Antenna type
Protocol
Hereby, TESY Ltd. declares that the Electrical convector with a built-in wireless communication module - ESP32-WROOM-32E is in compliance with Directive
2014/53/EU.
Тhe full text of the EU declaration of conformity is available at the following internet address: https://tesy.com/products/heating-appliances/electric-panel-
convectors .
ORDER OF THE STEPS FOR CONNECTING THE INBUILT WI-FI MODULE IN A
TESY APPLIANCE TO THE INTERNET
/QUICK START A/
You need to register on www.mytesy.com. If you already have a registration, go
directly to SETTINGS OF THE IN-BUILT WIRELESS COMMUNICATION MODULE
Registration on www.mytesy.com.
1. Open the web address
www.mytesy.com
2. You can change language from drop down menu located under TESY Brand.
3. Choose .
"Register as a new user"
4. Fill in the registration form using a valid email address.
5. You will receive registration confirmation and a link for activation of your
ACCOUNT. Follow the link to confirm the newly created ACCOUNT.
Note: If you do not receive an e-mail in your inbox, please check the Spam or Junk
folder.
6. There is an available application tesyCloud for a smartphone or a tablet for
both Android and iOS . operating system. The applications can be
found in the stores Google Play and App Store (the device which the
application will be installed on should be with the latest updated version of the
respective operating system or at maximum up to one previous version).
SETTINGS OF THE IN-BUILT WI-FI COMMUNICATION DEVICE
I.
/QUICK START B/
Open the "tesyCloud" app.
1.
In the "E-mail" and "Password" fields enter the email address and
2.
password that you have specified and confirmed in your registration
on https://www.mytesy.com.
Press the «LOG IN" button.
3.
The main screen of the app opens. Using commands from this screen,
you can:
Personalise your user profile;
3.1.
Add different TESY appliances;
3.2.
Control the appliances in the list of Devices and monitor their
3.3.
current status;
Status indication of the appliance:
- the appliance has reached the set temperature;
- the appliance is heating-up;
- the appliance is offline and cannot be controlled remotely;
-the appliance is turned on. Press the button to turn the
appliance off;
English
INSTRUCTIONS FOR OPERATION OF ELECTRICAL CONVECTOR VIA THE INTERNET
SPECIFICATION OF ΤΗΕ BUILT-IN WIRELESS COMMUNICATION MODULE (WI-FI)

EU DECLARATION OF CONFORMITY

in the address bar of the web browser.
Wi-Fi module
ESP32-WROOM-32E
2. 412 - 2.484 GHz
20 dBm
13
22 MHz
OFDM
PCB/3.4bBi
ΙΕΕΕ802. 11 b/g/n20/n40
- the appliance is turned off. Press the button to turn the
appliance on;
- Manual mode - you can set the desired temperature in the room
to be heated by moving the slider left and right.
- Program mode - the appliance functions when the settings in
Weekly Program menu have been done (week programmer).
You can exit this mode by switching the appliance on or off
from the ON/OFF button, or by changing the setting of the set
temperature, i.e. you are in the manual settings regime.
- Delay Start mode - the appliance is in Off mode, you can use the
arrows to set the time when the appliance is to be switched on
within 96 hours.
Custom app settings.
4.
To configure your account press the
of the app.
On the screen you will see the parameters that can be changed at any
time, as well as various useful information:
- Theme light/dark;
- Home screen;
- Privacy & security;
- Find a service;
- Local control of the device;
- Privacy & security;
In order to protect your personal data, the "Forget me" function is
provided and is available in the "Privacy & security" menu:
Attention: The selected function will delete Your profile along with
all the information stored so far.
The current profile cannot be restored or re-created within the next 24-
hour period.
To go back to the home screen press again the
Add a Cloud device
5.
To add a device using the mobile app, press the «+» button.
Select the type of the device that you want to add:
5.1.
button on the main screen
>
button.
Operation and Storage Manual of Panel Heater
EN
19