Delivery Scope And Transport Inspection; Unpacking; Disposal Of The Packaging - CASO DESIGN SMG20 Mode D'emploi Original

Warning
► Transport, unpack and use two persons to set down the device because of the heavy
weight of the device.

13.2 Delivery scope and transport inspection

As a rule, the SMG20 Microwave is delivered with the following components:
 SMG20 Microwave
 Rolling ring
 Operating Instructions
Please note
► Examine the shipment for its completeness and for any visible damages.
► Immediately notify the carrier, the insurance and the supplier about any incomplete
shipment or damages as a result of inadequate packaging or due to transportation.

13.3 Unpacking

To unpack the device, proceed as follows:
 Check the appliance for possible damages (dents, damaged door etc.). Damaged
appliances may not be used.
 Casing: Remove the protective film covering the outside surface of the appliance.
 The light brown/silver cover in the interior of the appliance protects the magnetron and
must not be removed.

13.4 Disposal of the packaging

The packaging protects the device against damages during transit. The packaging
materials are selected in accordance with environmentally compatible and recycling-
related points of view and can therefore be recycled.
Returning the packaging back to the material loop saves raw materials and reduces the
quantities of accumulated waste.
Take any packaging materials that are no longer required to "Green Dot" recycling
collection points for disposal.
Please note
► If possible, keep the original packaging for the device for the duration of the guarantee
period of the device, in order that the device can be re-packaged properly in the event
of a guarantee claim.
 Glass turntable
 Grating
 Remove all packaging and accessories.
55