Delivery Scope And Transport Inspection; Unpacking; Disposal Of The Packaging - CASO DESIGN CM1000 Mode D'emploi

13.2 Delivery scope and transport inspection

As a rule, the CM1000 Microwave is delivered with the following components:

CM1000 Microwave

Operating Instructions
► Examine the shipment for its completeness and for any visible damages.
► Immediately notify the carrier, the insurance and the supplier about any incomplete
shipment or damages as a result of inadequate packaging or due to transportation.

13.3 Unpacking

To unpack the device, proceed as follows:

Remove the device out of the carton and remove the packaging material.

Open the door of the device and remove the internal protective film from the
door.

Remove the red coloured safety adhesive strip on the floor of the cooking
chamber.

Do not remove the film on the oven ventilation opening!

Remove the blue protective film on the device itself.
► Only remove the blue protective film shortly before setting up the device in the
location where it will be used, to prevent scratches and dirt accumulations.

13.4 Disposal of the packaging

The packaging protects the device against damages during transit. The packaging
materials are selected in accordance with environmentally compatible and recycling-
related points of view and can therefore be recycled.
Returning the packaging back to the material loop saves raw materials and reduces the
quantities of accumulated waste. Take any packaging materials that are no longer required
to "Green Dot" recycling collection points for disposal.
► If possible, keep the original packaging for the device for the duration of the
guarantee period of the device, in order that the device can be re-packaged properly in
the event of a guarantee claim.
Please note
Please note
Please note
38