IKRA ART 4030 Manuel D'utilisation page 16

switch on the unit when hands or feet are
near the cutting elements.
h) Never use metal cutting devices.
i) Only use original spare parts.
j) Remove the battery before testing, cleaning
or working on the machine and when it is not
in use;
k) Inspect cooling air slots on the motor housing
at regular intervals for clog-ups and clean as
necessary.
2) Maintenance
a) Children should be under supervision to en-
sure that they do not play with the device.
b) Any other work should be performed by your
dealer.
c) Never use metal cutting devices.
d) Clean the cutting head at regular intervals.
e) Check the condition of the cutting head at fre-
quent intervals. If the behaviour of the cutting
head changes (vibration, noise), check imme-
diately as follows: Switch off the trimmer, hold
it firmly and bring the cutting head to a stand-
still by pressing it against the ground. Then
disconnect plug from power supply. Check
condition of cutting head - look for cracks.
f) Have a damaged cutting head replaced im-
mediately - even if it only has superficial
cracks. Never attempt to repair a damaged
cutting head.
g) Inspect cooling air slots on the motor housing
at regular intervals for clog-ups and clean as
necessary.
h) Clean plastic parts with a damp cloth. Do not
use aggressive cleaning chemicals.
i) Never hose down the electric trimmer!
j) Store trimmer indoors in a dry, high or locked
place and always keep out of reach of chil-
dren.
3) General Instructions
1. Read the instructions manual
2. Have your dealer or a specialist show you
how to operate your trimmer.
3. Before using the machine check that your
accu is in good condition and that there is no
damage. Never use the trimmer with a dam-
aged cutting head
4. Do not put the trimmer (lawn edge trimmer)
into operation if it is visibly damaged or worn.
5. Attention! Danger. The cutting head contin-
ues to rotate after switch-off (flywheel effect).
Keep your fingers and feet well clear to avoid
injury.
GB | Operating Instructions
6. Before starting work check that your accu-
7. Transporting the electric trimmer, e.g. car-
4) Operational Precautions
1. Make sure the open side of the protection
2. Wear goggles or properly fitted safety glass-
3. Always hold your trimmer firmly - make sure
4. Use particular caution while working in dense
5. Never leave your trimmer outdoors in rain.
6. Do not cut wet grass or other growth. Never
7. Take special care in slippery conditions - on
8. Work in a line across the slope and take
9. Watch for hidden obstacles such as tree
10. Avoid to use the trimmer in poor weather
11. Your electric trimmer is a high-speed, fast-
12. Have your dealer or a specialist show you
13. Children should be supervised to ensure that
14. This device is not intended to be used by
15. Be sure that anyone using your trimmer un-
GB-4
trimmer is in good condition and that it is
operating properly. Pay special attention to
the accu, switch and cutting head.
rying it to another site: Switch of the unit,
disconnect the plug.
guard is pointing away from yourself before
you switch on the trimmer.
es, sturdy closed shoes with non-slip soles,
gloves, snug-fitting work clothes and ear
protectors (ear plugs or ear mufflers).
you always maintain a good balance and
secure footing.
growth areas where your view of the ground
is obscured.
use in rain.
slopes and uneven ground.
special care when turning around.
stumps and roots to avoid stumbling.
conditions, especially if there is a risk of a
thunderstorm.
cutting power tool. The electrical connection
and cutting tool are potential sources of
danger. Therefore, special safety precau-
tions must be observed to reduce the risk of
personal injury.
how to operate your trimmer.
they do not play with the appliance.
persons (incl. children) with limited physical,
sensory or mental abilities or with a lack of
experience and/or knowledge unless they
are supervised by a person responsible for
their safety or were instructed on the proper
use of the device by that person.
derstands the information contained in these