Control Panel - ProBreeze PB-10 Mode D'emploi

1
7

CONTROL PANEL

― ―
1. Timer Indicator Light
2. Mode Indicator Light
3. Room Humidity Indicator Light
4. Humidity Setting Indicator Light
5. Water Tank 'Full' Indicator Light
6. 'Check' Indicator Light
7. Timer Button
8. Mode Button
9. Humidity Setting Button
10. Power Button
OPERATING INSTRUCTIONS
― ―
Turning On and Off:
• Press the power button once to turn the
appliance on or off.
• When turning on, the appliance will
function with the last settings selected.
• When turned off the fan will continue
to run for 2 minutes to help cool and
protect the internal components.
Setting a Timer:
• Press the Timer button to cycle through
the timer options of 2 hours, 4 hours, 8
hours, 12 hours, or no timer.
• The selected timer indicator light will
2 3
8 9
turn on. As the remaining time decreases,
the timer indicator lights indicating how
much time is left will turn on.
Setting the Mode:
Press the Mode button to cycle through the
mode options.
AUTO: The dehumidifier automatically
•
adjusts between high and low modes
depending on the humidity of the room,
and your desired humidity level.
LOW: The dehumidifier runs with a low
•
fan speed and a low heater setting.
HIGH: The dehumidifier runs with a high
•
fan speed and a high heater setting.
Note: The display will revert to showing the
room's current humidity level 3 seconds after
you select a setting.
Setting the Humidity:
Press the Humidity Setting Button to cycle
through the humidity setting options.
• At 40% humidity, the 40% humidity
indicator light will turn on.
• At 45% humidity, the 40% and 50%
humidity indicator lights will turn on.
• At 50% humidity, the 50% humidity
indicator light will turn on.
• At 55% humidity, the 50% and 60%
humidity indicator lights will turn on.
4 5 6
10
English | 4