Specifications - Fujitsu fi-565PR Guide De L'utilisateur

6. Specifications

Item
Printing Method
Print Timing
Printing Characters
Maximum number of
characters per line
Print orientation
Character size
Character pitch
Document that can
be scanned
Printing area
Dimension
Weight
Ambient condition
Consumable
Thermal inkjet printing
Post printing
: A to Z, a to z
Alphabet
Numeric Characters : 0, 1 to9
: ! " $ # % & ' ( ) * + , - . / : ; < = > ? @ [ \ ] ^ _` { | } ~
Symbols
Maximum 40 characters
0º, 180º (horizontal orientation), 90º, 270º (vertical orientation)
Height 2.91mm × width 2.82mm (horizontal orientation) / 0.1146 × 0.1110 (inches),
Height 2.82mm × width 2.91mm (vertical orientation) / 0.1110 × 0.1146 (inches)
3.53mm (0.1390inches)
Documents supported by fi-5650C
For the details, please refer to "fi-5650C Image Scanner Operator's Guide"-"Chapter 8
Document Specification for the ADF."
Documents with glossy surface such as thermal paper, thermal transfer paper,
ATTENTION
coated paper, and art paper take longer time for the ink to dry and may cause poor
print quality. The imprinter must be cleaned more frequently if you use these types of
papers.
D
Printing Area
(Back side)
C
A
Without Scanner : 413(W) × 164(D) × 246(H) mm / 16.26(W) × 6.46(D) × 9.69(H) inches
With Scanner : 428(W) × 746(D) × 296(H) mm / 16.85(W) × 29.37(D) × 11.65(H) inches
5 kg (11.02 lbs)
Temperature: 10 to 35ºC (50 to 95ºF), Humidity: 20 to 80%
Print Cartridge (P/N: CA00050-0262)
Replacement Cycle : 4,000,000 characters
(
The number of characters may decrease depending on the font selection.)
Specification
A=5mm
B=5mm
C=5mm
D=5mm
(0.20inches)
Do not print less than 5mm of
ATTENTION
the page margins.
B
fi-565PR Imprinter Operator's Guide | 17