Starting Bluetooth Mode; Registering Bluetooth Devices; Telephone Mode - Blaupunkt PHILADELPHIA 845 Notice D'utilisation

Starting Bluetooth mode

u Press the PHONE button
- or -
u Press the SRC button
Bluetooth source is selected.
- or -
u In the main menu, press the Bluetooth button.
The Bluetooth® menu is displayed. It contains the list
of known Bluetooth® devices. Other audio sources
are switched off .
[ ] Move selection mark.
[ ] Move selection mark.
[ ] Disconnect connection to marked device.
[ ] Delete marked device from the list.
[ ] Display options menu.
u Tap on the name of the Bluetooth® device with which
you want to establish a connection.
When the device is in range, the connection is estab-
lished and the menu for the device is displayed.
Note:
You can also move the selection mark by turning the
right rotary/pushbutton
tion with the selected device by briefl y pressing it.
To change to the next higher level, press the right
6
rotary/pushbutton

Registering Bluetooth devices

If you want to register a device with the car sound system
for the fi rst time, proceed as follows:
u Ensure that Bluetooth® is activated at the car sound
system and at your Bluetooth® device.
u In the options menu of the Bluetooth® mode, enter a
pairing code (see Bluetooth® settings).
u Search for new devices/connections on your Blue-
tooth® device.
02_Philadelphia845_gb.indd 41 02_Philadelphia845_gb.indd 41
2
.
4
repeatedly until the
6
and establish a connec-
for approx. 2 seconds.
u The car sound system appears as "BP 845" in the list
of Bluetooth® devices.
u Establish the connection; you may have to enter the
pairing code that was previously entered on the car
sound system.
The connection is being established and the menu
for the registered device is displayed.
Note:
If a telephone is connected with the car sound sys-
tem, the Bluetooth® icon
right edge of the display in all audio/video sources.

Telephone mode

If you connected a phone with the car sound system via
Bluetooth®, the following menu appears.
[ ] Change to next higher level.
[ ] Move selection mark.
[ ] Move selection mark.
[ ] Disconnect connection with current device.
[ ] Display keypad to directly enter a phone
number
[ ] Display options menu.
u Select a contact/number via the call lists or the
phone book and tap on the entry.
The connection is being established.
Note:
You can also move the selection mark by turning
the right rotary/pushbutton
lected entry by briefl y pressing it. To change to the
next higher level, press the right rotary/pushbutton
6
for approx. 2 seconds.
Bluetooth mode
is displayed at the top
6
and confi rm the se-
41
27.08.14 14:10 27.08.14 14:10