Technical Information; Rating Plate - AEG HC451220EB Notice D'utilisation

18 www.aeg.com
7. Loosely screw in the fixing plates
from below to the worktop and to
the connection bar.
8. Insert next hob into the worktop
cutout. Make sure that the front
edges of the hobs are on the same
level.

9. TECHNICAL INFORMATION

9.1 Rating plate

Modell HC451220EB
Typ 55 FED 01 AU
Induction 3.7 kW
Ser.Nr. .................
AEG
9.2 Cooking zones specification
Cooking zone
Middle front
The power of the cooking zones can be
different in some small range from the
data in the table. It changes with the
material and dimensions of the
cookware.
All manuals and user guides at all-guides.com
Nominal power
(maximum heat
setting) [W]
1800 / 3500
9. Tighten the fixing plates / retaining
grip screws.
10. Use silicone to seal the gaps
between the hobs and between the
hobs and the worktop.
11. Put some soapy water on the
silicone.
12. Press the rubber shape with some
strength against the glass ceramic
and move it slowly along the space.
13. Do not touch the silicone until it
becomes hard, it can last about a
day.
14. Carefully remove the silicone that
came out with a shaving blade.
15. Clean the glass surface.
PNC 941 560 805 00
220 - 240 V 50 - 60 Hz
3.7 kW
Power function Power function
[W] maximum dura-
tion [min]
2800 / 3700 5
For optimal cooking results use
cookware not larger than the diameter in
the table.
Cookware diam-
eter [mm]
145 - 180 / 245 -
280