Table des Matières
Publicité
12
Fully tighten the key cylinder and chassis screws.
The cylinder face needs to be flush to the outside escutcheon. Tighten
the cylinder mounting screw.
Cylinder
mounting
screw
13
Install the armor plate.
14
Connect the battery cable.
Install four (4) AA batteries into the battery holder. Tuck the cable behind
the tab in the escutcheon.
15
Install the battery cover and tighten the screw.
15a Optional: Install security screw and washer.
Remove standard screw and washer and replace with security screw
and washer.
16
Continue to User Guide.
Go to page 9 for information for programming your lock.
After holder
is installed,
tuck cable
behind tab.
5
Publicité
Table des Matières
