Sony SU-PF3M Mode D'emploi page 8

3
Secure the TV.
1 Insert the anchor attachments (detached in
step 1 of procedure 1) in the second screw
holes from the top on the left and right pillars
of the rear panel and tighten them to secure
the TV at the center of its rear.
2 Insert the four securing screws (detached in
step 1 of procedure 1) in the elongate holes
on the lower part of the both pillars of the
rear panel and tighten them to secure the TV
at the lower part of its rear.
Notes
• Be sure to secure the anchor attachments first, as it
will be easier to align the TV securing screws with
their screw holes.
• When using an electric screwdriver, set the torque
setting to about 1.5 N·m.
Rear of the TV
8
(GB)
Anchor
attachment
2
Securing screw
Attaching the glass
shelf
1
Attach the glass shelf.
1 Insert the glass shelf into the grooves in both
pillars of the Floating Stand.
2 Secure the glass shelf from beneath with the
supplied securing screws (for glass shelf) as
shown below.
1
1
Notes
• Insert the glass shelf after installing the TV on the
Floating Stand. If you fail to do so, you may hit the
glass with the TV during installation and product
damage or personal injury may result.
• Attach the glass shelf to the Floating Stand holding
the glass shelf with the "caution" label at front
right, as shown in the illustration.
Caution label
Insert the securing screw so that
the cross slot side faces down as
shown in the illustration on the
left.
2
Front of the
TV
Insert the glass
shelf all the
way in until it
touches the
stopper.