T.h.e.™ True Convection Cooking; Convect Bake; Convect Roast - KitchenAid ARCHITECT II Serie Guide D'utilisation Et D'entretien

Masquer les pouces Voir aussi pour ARCHITECT II Serie:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

FOOD
Seafood
Fish Steaks
1" (2.5 cm) thick
flaky
Lobster tails, 3-4 oz each
T.H.E.™ True Convection Cooking
(on some models)
In a convection oven, the fan-circulated hot air continually
distributes heat more evenly than the natural movement of air in a
standard thermal oven. This movement of hot air helps maintain a
consistent temperature throughout the oven, cooking foods more
evenly, crisping surfaces while sealing in moisture and yielding
crustier breads.
Most foods can be cooked by lowering cooking temperatures
25°F to 50°F (14°C to 28°C), and cooking time can be shortened
by as much as 30 percent, especially for large turkeys and roasts.
It is important not to cover foods with lids or aluminum foil so
that surface areas remain exposed to the circulating air,
allowing browning and crisping.
Keep heat loss to a minimum by opening the oven door only
when necessary.
Choose cookie sheets without sides and roasting pans with
lower sides to allow air to move freely around the food.
Test baked goods for doneness a few minutes before the
minimum cooking time with an alternative method such as
using a toothpick.
Use a meat thermometer or the temperature probe (on some
models) to determine the doneness of meats and poultry.
Check the temperature of pork and poultry in 2 or 3 places.

Convect Bake

(on some models)
Convect Bake can be used to bake and cook foods on single or
multiple racks. It is helpful to stagger items on the racks to allow
a more even flow of heat. If the oven is full, extra cooking time
may be needed.
When cooking an oven meal with several different types of foods,
be sure to select recipes that require similar temperatures.
Cookware should sit in the oven with at least 1" (2.5 cm) of space
between the cookware and the sides of the oven.
Allow the range to preheat before placing food in the oven.
During convection baking preheat, the broil elements and the
bake element all heat the oven cavity. After preheat, the
convection element will cycle on and off in intervals to maintain
oven temperature, while the fan constantly circulates the hot air.
If the oven door is opened during convection baking or
preheating, the convection element and fan will turn off
immediately. They will come back on once the door is closed.
Reduce recipe temperature 25°F (14°C). The cook time may
need to be reduced also.
To Convect Bake:
Before convection baking, position racks according to the
"Positioning Racks and Bakeware" section.
1. Press CONVECT.
2. Select CNVT BAKE using the Quickset pads.
14
All manuals and user guides at all-guides.com
RACK
TOTAL
POSITION
TIME
MIN.
6
10-15
5
7-10
3. Select the oven temperature using the Quickset pads
OR
Press the number pads to enter a temperature. The
temperature can be set between 195°F and 550°F (91°C and
288°C) in 5° increments when Auto Convect is on. If Auto
Convect is off, temperature can be set from 170°F (77°C).
4. Press ENTER.
After 3 seconds, the oven will begin to preheat. "CNVT
BAKE" and "PREHEAT" will appear in the display along with
100° or the actual oven temperature, whichever is higher.
The temperature in the display will increase in 1° increments
until the oven reaches the preset temperature. Allow about
15 minutes for the oven to preheat.
When the oven is preheated, the oven will beep, "PREHEAT"
will turn off and "CNVT BAKE" will be displayed. "AUTO" will
be displayed if Auto Convect conversion feature is turned on.
5. Place food in the oven.
6. Press CANCEL when finished cooking.

Convect Roast

(on some models)
WARNING
Food Poisoning Hazard
Do not let food sit in oven more than one hour before
or after cooking.
Doing so can result in food poisoning or sickness.
Convection Roast can be used to roast meat and poultry, and
vegetables.
To Convect Roast:
Before convection roasting, position racks according to the
"Positioning Racks and Bakeware" section. It is not necessary to
wait for the oven to preheat before putting food in, unless
recommended in the recipe. If a recipe suggest preheating the
oven, add 15 minutes to the cook time.
1. Place food in the oven.
2. Press CONVECT.
3. Use the arrow to scroll to select CNVT ROAST.
4. Select the oven temperature using the Quickset pads.
OR
Enter the desired temperature using the number pads.
The temperature can be set between 170°F and 550°F (77°C
and 288°C).
5. Press ENTER pad to set.
6. Enter desired cook time. Enter the conventional roasting time
using the number pads.
NOTE: If Auto Convect is off, a roast time will not be required.
After 3 seconds, the oven will begin to heat. "CNVT ROAST"
will appear in the display along with "100°" or the actual oven
temperature, whichever is higher.
The temperature in the display will increase in 1° increments
until the oven reaches the preset temperature.
Cook time will begin to count down.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Architect kerk201Architect kers205Architect ykers205

Table des Matières