Changing Time Settings Part Way Through A Massage; Beginning A Massage Using Recorded Time Settings - Panasonic REAL PRO Elite EP3513 Mode D'emploi

2. Press .
The display will flash.
3. Open the cover and input the time settings.
(1) Set the time for each area of the body.
self program time input
• The time will change, as shown below,
neck/shoulder hands/arms
according to the number of times pressed.
back
(2) Press after completing settings for each body area.
OK
lower back OK
• The selected program will be configured to reflect your time settings.
lower body
4. Close the cover.
• If the cover is left open, you will be unable to use the Leg Stretch OFF/ON, Back Vibration OFF/ON, Program
Strength or Focus buttons during the massage.
From this point on the instructions for operation are the same as those for those once a massage
program is selected, as covered starting from step 2 of page 16.
Strength adjustment, on/off switching of leg stretch and back vibration functions are performed in
the same way. (See Page 19)
• The duration of a massage in the self program mode is approximately 15 minutes.
• Body scanning is not performed when all time settings for the upper body are set to zero. Upper-body vibration will
also be inactive in this case.
• If time settings for the lower body are set to zero, the massage will commence with leg stretch function set to off.
This function may be turned on by pressing the Leg Stretch OFF/ON button.
22
All manuals and user guides at all-guides.com
self program
time
USING THE SELF PROGRAM

Changing Time Settings Part Way through a Massage

1. Open the cover and input the time
settings.
(1) Open the cover and input the time
self program time input
settings you want to change.
neck/shoulder hands/arms
back
(2) Press after completing setting
OK
lower back OK
adjustments.
The program will be reconfigured
lower body
to reflect the change(s) made to
settings.
Advanced Usage
Saving Time by Recording Time Settings
Recording Time Settings
After the massage finishes or is pressed to finish the massage, proceed as follows.
user
When the buttons flash...
Press the User Memory button you Only Pressed Button
want to record your settings to. Flashes
user
When the Selected Button Flashes Rapidly
Rapid Flashing • This indicates that settings have already been recorded using that User Memory button.
To record over the existing data, press the same button once more. (The existing data
user
will be deleted.)
To keep the existing data, press another User Memory button.

Beginning a Massage Using Recorded Time Settings

(1) Press .
user
(2) Press the button used
to record your data.
(3) Press .
Changing Recorded Time Settings
See "Changing Time Settings Part Way through a Massage" above.
2. Close the cover.
• If the cover is left open, you will be unable
to use the Leg Stretch OFF/ON, Back
Vibration OFF/ON, Program Strength or
Focus buttons during the massage.
user
Recording Complete
self program
• The recorded time settings will
be displayed.
The program with the recorded
time settings will begin
immediately.
time
23