Additional Information
About Recorded Massage Settings Shown on the Display
• The settings you record after a massage finishes or
the control panel.
• Setting adjustments shown on the display do not indicate changes made to recorded settings unless the
above procedure has been performed ("3. Record the adjustments you have made.").
Program
Buttons light up in order
Selection
from left to right.
Buttons
Display
Settings shown are those of the Massage Program button that is lit up.
Leg Stretch OFF/ON Setting
time remaining
intensity
intensity
hands/arms
lower body
Program Strength Settings
(Hands/Arms, Lower Body)
The volume setting of the voice guidance is also recorded.
Record changes made to individual settings during a massage program.
• Settings can be recorded when the program finishes or
(Setting changes cannot be recorded when the program is finished by pressing
were made in manual operation.)
• Setting changes are recorded in the same way as described in "Change and record massage programs according
to your preference."
Recordable Settings
• Settings are divided between those that are recorded for individual programs and those that are recorded as
settings shared by all programs.
off/on
shiatsu
user
intensity intensity
hands /arms
open
leg stretch
vibration
intensity
off/on
off/on
hands/
lower
Leg Stretch OFF/ON button
arms
body
Back Vibration
Program Strength
OFF/ON Setting
26
All manuals and user guides at all-guides.com
is pressed to finish a massage are displayed on
Displayed when
Body Scanning Data
self program
time
intensity speed
upper body
Back Vibration
Program Strength
OFF/ON Settings
Settings (Upper Body)
is pressed to finish the massage.
or when the changes to settings
pre-programs
ottoman reclining
deep
swedish
stretch
quick
self program
time remaining
self program
voice
time
intensity speed
upper body
lower body
open
self program time input
neck / back
focus
manual controls
roller position
upper
body
Settings
When You Want to Use Your Recorded Massage Settings
3
1
2
leg stretch
is lit up
Time Settings
3. Press one of the flashing buttons (
self program
When
Are Selected
time
• The massage lounger will carry out body scanning to check whether or not someone with the same
physical characteristics is using the unit.
• The program will start immediately if the occupant is determined to have the same physical characteristics.
• The body scanning will be performed if physical characteristics are determined to be different due to the
occupant's sitting position, etc. (See Page 16)
Creating a Customized Program
Adjust settings as desired and record to the same User Memory button using the steps given in "Change and
record massage programs according to your preference." on page 25.
Voice Guidance
Volume Setting
pre-programs
ottoman reclining
off/on
shiatsu
deep
swedish
stretch
quick
self program
time remaining
self program
voice
user
time
intensity intensity
intensity speed
hands /arms
lower body
upper body
open
open
self program time input
vibration
intensity
neck / back
focus
manual controls
off/on
off/on
hands/
lower
upper
roller position
arms
body
body
,
,
,
,
or
If time settings are
recorded...
A massage using the
recorded time settings will
start.
To change time settings,
please see page 23.
1. Press
to turn on the power.
2. Press the button used to record
your data.
user
,
,
,
or
) to select a program.
When
Is Selected
If time settings are not
recorded...
Set time settings
according to the steps
given on pages 21 to 22.
27