Installation
(continued)
3 ) Install the backrest away from the wall
Check whether it hits the wall
(When the backrest is fully up)
More than 30 cm (11.8 in.)
More than 5 cm (2.0 in.)
(When the backrest is fully down)
EN14
When installing, using a caster to move
❶
Preparation
①
After procedures EN15 to EN16
❶・❹~❺, then press
②
Press
to raise the backrest
③
Press
④
Turn the power switch "off" and
remove the power plug.
❷
Movement
Lift lower than the hip
Place the controller in
the controller pocket and
place the power cord on
the seat surface
Mat etc. Caster
Do not
hold here
Hold it by the hard part inside
Before starting massage each time
❶
Check the surrounding area
Make sure there are no objects, persons, or
z
pets in the vicinity of the unit.
❷
Turn over comfort cushion
(Check the main unit )
❸
Confirm that foreign objects is
not sandwiched in the main unit
To check the leg/foot massage section, push
the legrest forward by hand, and check that
no foreign objects is sandwiched in.
When you release your hand, the leg/foot massage
z
section will be retracted.
Stow completely using both hands. Please be care-
ful not to get your hands caught.
Backrest
Hand/arm massage section
Clearance of
seating surface
Clearance of leg/foot
massage section
Legrest
EN15