Installation; Accessories - Panasonic EP-MAC8 Mode D'emploi

Parts and functions
(continued)
①
1
⑤
⑥
②
⑦
⑧
③ ④
2
3
4
5
6
7
1
Display part
Illustration of all lit states.
2
Off / On button
When switching power supply off / on.
3
Menu selection button
4
Up / Down （▲ ▼） selection / adjustment button
Left / Right （ ◀▶） selection / adjustment button
5
（EN31）
"DOUBLE HEAT" off / on button
Use "HEAT", "SOLE HEAT" off / on.

6
"AIR / STRETCH" adjustment button
7
"BACK INTENSITY" adjustment button
8
Quick stop button
Press when you want to stop massaging quickly.
9
OK button

Electric reclining button
EN12
Controller
Display
①
"AUTO" display
When choosing a course ...
indicates the currently selected course name.
Massaging ...
Displays the name of the course you are
currently using.
②
"AIR / STRETCH" display
Displays the selected action / part.

③
"AIR INTENSITY" adjustment display
"AIR / STRETCH" current air intensity is
displayed in three levels.
④
"BACK INTENSITY" adjustment display
8
Current back intensity can be adjusted through a
maximum of 5 levels.
⑤
Shoulder position display
In shoulder position adjustment mode, the
flashes, and shoulder position is adjusted through
19 levels.
Remaining time display
and are displayed, the remaining
When min
9
time is displayed.
⑥
"HEAT" operation display
Heat off / on displayed.

⑦
Massager operation display
Displays the massage operation that you are
currently using. （EN25）
⑧
"SOLE HEAT" operation display
"SOLE HEAT" off / on displayed.
<Massage heads position display>
Displays the approximate
current position of massage
heads.
<Air display>
Displays the currently selected
air massage action. Flashes the
part of the air massage which is
currently done.

Installation

1 ) Open the packing box and take out the item
Check the main unit and accessories
Main Unit
Illustration of the unpacking state.
(When the backrest is fully down)

Accessories

Lock switch key (1)
At the time of purchase, the lock switch is
inserted into the Power switch section part.
Comfort cushion
2 ) Loading and installing the item
Since it is a heavy item, please be careful not to hurt

your back etc when moving in. (carry by 2 people.)
Weight: approx. 69 kg (152.1 lbs)
When lowering the main unit please pay attention to

your feet and slowly lower it.
Please bring down the legrest to the end with both

hands placed on it. It spring back when released.
When lifting it up to carry in and install it
If you do not hold it properly, it will cause the body to
fall and damage the floor.
Please fully recline the backrest and lift the main unit
manually with the legrest put back.
Place the controller in
the controller pocket and
place the power cord on
the seat surface.
Installation
place
( lay a mat etc.)
Do not
hold here
Open the hook and loop fastener
Hold it by the hard
and hied it by the hard plastic
part inside.
part inside.
Close the surface fastener after
installation.
How to attach the
Comfort cushion
Close the zipper on
the upper part of the
backrest.
EN13