Replacing The Batteries; Location - Korg WAVEDRUM mini sondius xg Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

1. To open the battery cover, lightly press and lift up
the latches indicated by the arrows in the illustra-
tion.
2. Insert six AA nickel-metal hydride batteries.
Take care that the polarity (+ and - indication) of
each battery is correct.
3. Align the tabs of the battery cover, and close it.
Press down on the latches indicated by the
arrows until the cover clicks securely closed.
Tab
Battery cover

Replacing the batteries

When the batteries run low, the battery indicator
will blink. The WAVEDRUM Mini will continue
functioning for a time, but you should replace the
batteries as soon as possible.
Batteries that have become unusable should be
removed immediately. Leaving dead batteries
in the unit may cause malfunctions (e.g., elec-
trolyte leakage from the batteries). You should
also remove the batteries if you won't be using
the unit for an extended period of time.

Location

Place the WAVEDRUM Mini on a flat and sta-
ble location. If you're performing in a seated
position, you can use the included strap to fas-
ten it to your leg. When using the clip, fasten it
securely to the object, ensuring that it's in a sta-
ble location like the WAVEDRUM Mini itself.
You should neatly bundle the power cable and
audio cable so that they don't catch on any-
thing.
Attaching the included clip to an object, or
detaching it
By attaching the WAVEDRUM Mini's clip to a
nearby object that emits sound when you strike it,
you can transform that object into a Wavedrum. The
tonal character will vary depending on the object, so
we suggest that you try out various types of objects.
• Lower the VOLUME knob before you attach or
detach the clip.
• Secure the clip to the object so that it does not
come off while you perform.
• Do not pull on the jaws of the clip when detach-
ing it from the object. Doing so may damage the
clip or the object. Be sure to open the clip when
detaching it.
Although the clip can be attached to a wide
variety of objects, you should be aware of your
surroundings, and refrain from attaching it in
ways that would inconvenience others. Since it
is possible for the clip to deform or scratch the
object where it's attached, please use caution
when attaching it.
If the clip is left attached to an object for an
extended period of time, it may leave a mark
on the object when removed. Depending on
aging or the state of the object's surface finish,
damage may occur regardless of the length of
time.
Getting ready to play
9

Publicité

Table des Matières

Dépannage

loading

Table des Matières