Storage When Not Using The Product; Troubleshooting - SilverCrest SWDR 500 A1 Manuel D'utilisation Et Informations Sur Les Services

SilverCrest SWDR 500 A1
You can connect the supplied earphones SWDR 500 A1 (D) to the earphones
connector (21). While the earphones are plugged in, the speaker (16) is
muted automatically.

Storage when not using the product

If you will not be using the device for a long period of time, remove
any inserted batteries.
Store the device in a dry, cool place. To protect against dust, we
recommend storing the device in the pouch (C) supplied.

Troubleshooting

The device does not switch on.

Check whether the wall plug power adapter is plugged in.

The inserted batteries may be empty, fit new batteries.

Test that the batteries are fitted with the correct polarity. Please note the
diagram in the battery compartment and on the batteries. See also the
chapter "Inserting the batteries".

Please check if the button lock feature is enabled. If necessary, press and
hold the "LOCK" button (3) for approx. one second to disable the button
lock.
No radio reception, poor radio reception

Pull the telescopic antenna (1) all the way out and make sure it is
orientated correctly.

Tune in the station correctly. If necessary, start a new station search.

Check whether the "DX/LOCAL" switch (22) is in the correct position.
Please also read the chapter "Setting the sensitivity".
The station name is not shown.

The tuned-in station does not broadcast any RDS signal or the signal is too
weak. Re-orientate the antenna to optimise reception.
78 - English