Enabling/Disabling The Button Lock; Connecting The Earphones - SilverCrest SWDR 500 A1 Manuel D'utilisation Et Informations Sur Les Services

 To disable the alarm, press the "M-/AL1" button (14) as many times as
necessary until no alarm icon (33, 34) is shown on the display (6).
Even when the alarm function is enabled, you can use the device as
usual. Please note:

Waking up with the radio:
The alarm always powers on with the last tuned-in frequency
and frequency band.

Waking up with the buzzer:
The alarm starts very low and gets louder until the set volume is
reached.

Enabling/disabling the button lock

Press and hold the "LOCK" button (3) for approx. one second to activate the
button lock. The "LOCK" icon (35) flashes on the display (6).
In order to operate the device, you first have to disable the button lock. To do
this, press and hold the "LOCK" button (3) again for approx. one second. The
"LOCK" icon (35) no longer flashes on the display (6).
Please note that the alarm sound cannot be stopped or delayed while the
button lock is enabled.

Connecting the earphones

WARNING! Do not use any earphones other than the supplied
SWDR 500 A1. Other types of earphones can produce harmful
sound pressure levels.
Caution when using earphones. Listening at a high volume can
damage your hearing.
SilverCrest SWDR 500 A1
English - 77