Connecting The Power Adapter; Getting Started; Display Illumination; Switching The Device On/Off - SilverCrest SWDR 500 A1 Manuel D'utilisation Et Informations Sur Les Services

WARNING! Remove the batteries when the device is not to be
used for an extended period.

Connecting the power adapter

Plug the wall plug power adapter plug (B) into the receptacle (20) of the multi-
band tuner (A). Plug the wall plug power adapter (B) into an easily accessible
power socket.
While the wall plug power adapter (B) is connected, the device is powered
from the mains and not from any inserted batteries. When powering the device
via the wall plug power adapter (B) for a long time, you should remove the
batteries to avoid any leakage.

Getting started

Display illumination

Press any button to switch the display illumination on for approx. 9 seconds. It
automatically switches back off after this time.

Switching the device on/off

To power the device on, press the "POWER/SLEEP" button (8) once. When
powered on, the currently tuned in frequency, the frequency band and the day
of the week are shown on the display (6):
For the "FM" band, the name of the station is also shown, if broadcast. When
the station transmits no name or when the signal is too weak, the current date is
shown instead.
VHF FM band
FM
Medium wave band
MW
Short wave band
SW
Long wave band
LW
SilverCrest SWDR 500 A1
English - 61