Manufacturer's Warranty; Spare Parts Lists - Roller Central 1/8-2" Notice D'utilisation

eng
5. Faults
5.1. Fault: Manual die stock has diffi culty cutting.
Cause:
● Not an original ROLLER'S Central quick-change die head.
● Dies are blunt.
● Unsuitable or insuffi cient thread cutting material
5.2. Fault: No workable thread, thread rips off.
Cause:
● Dies are blunt.
● Dies inserted incorrectly.
● Unsuitable or insuffi cient thread cutting material
● Pipe material is unsuitable for thread cutting.
5.3. Fault: Thread is cut skew to the pipe axis.
Cause:
● Pipe not cut at right angle
5.4. Fault: Pipe slips in the vice.
Cause:
● Pipe not clamped tight enough.
● Vice/die unsuitable or defective.
6. Disposal
The tool may not be thrown into the domestic waste at the end of use. It must
be disposed of properly by law.

7. Manufacturer's Warranty

The warranty period shall be 12 months from delivery of the new product to the
fi rst user. The date of delivery shall be documented by the submission of the
original purchase documents, which must include the date of purchase and the
designation of the product. All functional defects occurring within the warranty
period, which are clearly the consequence of defects in production or materials,
will be remedied free of charge. The remedy of defects shall not extend or
renew the warranty period for the product. Damage attributable to natural wear
and tear, incorrect treatment or misuse, failure to observe the operational
instructions, unsuitable operating materials, excessive demand, use for unau-
thorized purposes, interventions by the customer or a third party or other
reasons, for which ROLLER is not responsible, shall be excluded from the
warranty
Services under the warranty may only be provided by customer service stations
authorized for this purpose by ROLLER. Complaints will only be accepted if
the product is returned to a customer service station authorized by ROLLER
without prior interference and in a fully assembled condition. Replaced products
and parts shall become the property of ROLLER.
8
Remedy:
● Only use original ROLLER'S Central quick-change die heads, ROLLER'S
quick-change die heads S.
● Change ROLLER'S dies, see 4.2. ROLLER'S dies, see 4.2. ROLLER'S
● Use suffi cient, undiluted quantity of ROLLER'S Smaragdol or ROLLER'S
Rubinol 2000 thread cutting material.
Remedy:
● Change dies, see 4.2.
● Note the numbering of the dies to the slot number of the die head body (10), e dies to the slot number of the die head body (10), e d
see 4.2, change dies if necessary e dies if necessary e d
● Use suffi cient, undiluted quantity of ROLLER'S Smaragdol or ROLLER'S
Rubinol 2000 thread cutting material.
● Only use approved pipes.
Remedy:
● Cut pipe at right angle with ROLLER'S Fox with guide holder and ROLLER'S Fox ROLLER'S Fox with guide holder and
special saw blade or with ROLLER'S Corso St, ROLLER'S Filou, ROLLER'S
Disc 100
Remedy:
● Increase clamping pressure.
● Change vice/die. ROLLER'S Anaconda 3B/ROLLER'S Anaconda WB
is recommended for secure clamping.
The user shall be responsible for the cost of shipping and returning the product.
A list of the ROLLER-authorized customer service stations is available on the
Internet under www.albert-roller.de. For countries which are not listed, the
product must be sent to the SERVICE-CENTER, Neue Rommelshauser Strasse 4,
71332 Waiblingen, Deutschland. The legal rights of the user, in particular the
right to make claims against the seller in case of defects as well as claims due
to wilful violation of obligations and claims under the product liability law are
not restricted by this warranty.
This warranty is subject to German law with the exclusion of the confl ict of laws
rules of German International Private Law as well as with the exclusion of the
United Nations Convention on Contracts for the International Sales of Goods
(CISG). Warrantor of this world-wide valid manufacturer's warranty is Albert
Roller GmbH & Co KG, Neue Rommelshauser Straße 4, 71332 Waiblingen,
Deutschland.

8. Spare parts lists

For spare parts lists, see www.albert-roller.de → Downloads → Parts lists.
eng
ROLLER'S