View A Camera; Scan Camera - Luvion GRAND ELITE 2 Manuel D'instructions

GRAND ELITE 2
18
press and hold the PAIR key until the LED light ashes.
6. If unsuccessful, delete the camera channel as per 5.6.1 on page 17, and attempt to
pair again.
NOTE
A Camera Unit can only be registered to one Monitor Unit at any one time.

5.6.3 View a camera

1. Press the MENU button and the menu bar will pop up.
2. 2. Press the
the del / add / New / scan menu will pop up.
3. Press the
button to con rm.
4. cam 1 / cam 2 / cam 3 / cam 4 will pop up, press the
button to select the desired Camera Unit to view.
TIP: QUICK METHOD TO CYCLE THROUGH CAM CHANNELS
Quick method to view desired camera instead of entering into the menu bar: directly
press the OK button to cycle through paired cameras: cam 1 / cam 2 / cam 3 / cam 4 /
scan(x).
EN

5.6.4 Scan camera

This function automatically cycles through your paired camera channels to display each
camera for 10 seconds. This function is only useful if you have more than 1 Camera Unit
paired.
1. Press the MENU button and the menu bar will pop up.
2. Press the
the del/add/view/scan menu will pop up.
3. Press the
button to con rm.
4. The screen will then display the video from di erent paired cameras in a loop of
cam 1 / cam 2 / cam 3 / cam 4, changing every 12 seconds.
NOTE
When in Scan mode, the Monitor Unit will stop scanning and alert you if one of the
Premium Babymonitor
LEFT button or
DOWN button to select VIEW icon, and press the OK
UP button or
LEFT button or RIGHT button untill
DOWN button to select SCAN icon, and press the OK
UP button or
RIGHT button until Cam icon is highlighted, and
UP button or DOWN
CAM icon is highlighted, and