Charging Battery; English - Konrow STONE PLUS Guide D'utilisation

1. Inserting a SIM card
• Turn off the phone and remove the back cover and battery with a
screwdriver.
• Insert the SIM card correctly in the space provided (see opposite
pattern). You have 2 SIM card ports (SIM1 and SIM2). Be sure to respect
the direction of insertion of the cards.
• Then replace the battery and the rear cover.
CAUTION : Data usage can only be used on one SIM Card.
2. Inserting a MicroSD memory card
It is possible to increase the internal memory of the STONE PLUS with a
MicroSD card (32GB maximum).
• Turn off the phone and remove the back cover and battery with the
screwdriver.
• Insert the memory card into the slot provided.
• Then replace the battery and the back shell of the mobile phone.

3. Charging battery

• To charge the battery, plug the USB cable (supplied) into the USB port on your mobile phone
and connect the AC adapter to a power outlet.
• The battery charge icon illuminates during charging and indicates charging status.
• When the battery is fully charged, you can disconnect the device from the power outlet.
IMPORTANT :
• Mobile charging is only done via its USB port.
• The battery must be loaded while the less 5 at 8 hours during the first charge.
Note : you can use the device when it is loading. Then, it is possible that the duration of charge
complete is longer.
Precautions to be taken for the charging of the battery :
• To charge the battery, use only the AC adapter that came with your device. Do not use any
other power supplies or electrical devices.
• The electrical outlet to which the appliance is connected must be installed near the equipment
and must always be easily accessible.
• Always wait at least 5 seconds after turning off the device before restarting it. Switching the
device off and on again immediately may damage the electrical circuits.
14

English

SIM 1 SIM 2
Micro
SD