Maintaining The Device - Konrow STONE PLUS Guide D'utilisation

Risk of fire or electric shock
Do not expose this device to rain or moisture. Do not expose the product to water droplets
or to splashes and do not place any object filled with liquid, such as a vase, on the device.
Do not use the product near flammable or explosive materials.
Device to handle with care
Do not exert excessive pressure on the screen and do not put objects on it. This could damage the
screen. Do not drop the device. Do not expose the device to shocks, friction or impact.
Operating guidelines

Maintaining the device

Keep the device away from all metal objects (coins, keys, etc). Clean only with a soft cloth (dry or
slightly damp).
Do not attempt to disassemble the device; it would no longer be covered by the warranty. Use
only the spare parts/accessories specified by the manufacturer. Refer to a qualified person for
any repairs. After any service or repair carried out on this product, ask the technician to perform
a safety check.
Prevent data loss
Significant electromagnetic interference or electrostatic discharge may cause malfunction or loss
of data. If the device is not working properly, restart the device or unplug the mains adaptor from
the power socket then plug it in again. In order to prevent data loss, remember to make a (computer
or paper) back-up of information saved on the device.
Recycling
The symbol shown here and on the product means that the product is classed as
Electrical or Electronic Equipment and should not be disposed with other household
or commercial waste at the end of its working life.
The Waste Electrical and Electronic Equipment (WEEE) Directive (2012/19/EU) has
been put in place to recycle products using best available recovery and recycling
techniques to minimise the impact on the environment, treat any hazardous
substances and avoid the increasing landfill.
Product disposal instructions for residential users:
If you no longer use the device, remove and dispose of the battery, as well as the device, in
compliance with the local recycling procedures. For more information please contact your local
authority or the retailer where the product was purchased.
Product disposal instructions for business users:
Business users should contact their suppliers and check the terms and conditions of the purchase
contract and ensure that this product is not mixed with other commercial waste for disposal.
Specific Absorption Rate "SAR" - Exposure to radio frequency
Your device is designed and produced to comply with European authorities for exposure to
radiofrequencies.
The SAR (Specific Absorption Rate) of devices quantifies the maximum level of exposure of the user
to electromagnetic waves for normal use at the ear and use close to the body. European legislation
stipulates that the SAR must not exceed 2W/kg averaged over 10g of tissue.
The value of the SAR is determined on the basis of the highest level of radio frequencies emitted
during laboratory tests.
The actual value of the SAR during use of the device is lower than this level.
The value of the SAR of the device can vary according to the following factors: how far/close the
device is to a relay antenna, use of accessories and others.
36