DeFelsko PosiTector UTG Guide Rapide page 14

NOTE:
Keyboard
When enabled and connected to a computer, the PosiTector will be
recognized as a Keyboard. Readings are sent to the computer as
they are taken, emulating keystrokes, followed by a carriage return.
Stream
Stream readings via USB Serial Port to SPC data collection
software, drones, ROVs, PLCs, and robotic devices.
For more information on USB Keyboard and
NOTE:
Streaming visit: www.defelsko.com/usb/stream/
Sync .net Now
The above WiFi, USB and Bluetooth menus contain a Sync .net
Now option. When selected, the Gage immediately synchronizes
stored measurement data via its respective communication
method (internet connection required).
Alternatively, select Auto Sync .net from within the USB connect
menu to automatically synchronize upon connection to a PC.
Additional measurements added to memory while connected are
synchronized only when the USB cable is disconnected and
reconnected, or when the Sync .net Now option is selected. WiFi
connected gages automatically attempt synchronization upon
power up.
NOTE:
13