DeFelsko PosiTector UTG Guide Rapide page 11

when the probe is lifted from the surface – ideal for quick
inspection over a large area.
A Scan
A display in which the received pulse
amplitude is represented along the y axis
and the travel distance of the ultrasonic
pulse is represented along the x axis.
PosiTector UTG M and PosiTector UTG
P probes provide two cursors (vertical
green lines) which allow the user to
measure the difference between echoes
shown in the graphic display.
B Scan
A display in which a cross sectional profile
of the test material is represented.
SmartCouple
When selected, the probe, once coupled, will remain coupled
until the ( + ) button is pressed. Eliminates unintentional decoupling.
SE Mode
Switches from multiple-echo
- To detect pits and flaws
- To increase the measurement range
- To obtain thickness measurements in
circumstances where multiple-echo can not
Reading Tick
When selected (default), the Gage will emit a "tick" sound
every time the probe takes a measurement.
Battery Type
Selects the type of batteries used in the Gage from a choice of
"Alkaline", "Lithium" or "NiMH" (nickel-metal hydride rechargeable).
If "NiMH" is selected, the Gage will trickle charge the batteries
while connected via USB to a PC or optional AC power supply
(USBAC). The battery state indicator symbol is calibrated for the
selected battery type. No damage will occur if the battery type
used in the Gage does not match the selected battery type.
(Advanced models only)
(Advanced models only)
Coupled
(PosiTector UTG M multiple-echo probe only)
10
Smart Coupled
to single-echo mode: