Topdon OBDCAN Serie Mode D'emploi page 21

9. Reopen the update tool and select the update or click "Select All"
and click [Download].
10. Once all steps are complete, reinsert the TF card into the tool
and power the tool via USB in computer or via OBD2 port in
vehicle. The tool will prompt you to upgrade, click [OK] to start
updating and a progress bar will appear. It may take several
minitues to finish update if your upgrade package file is too large,
please wait.
11. The registration process is now complete!
Method 2: Via USB Cable
Note: Make sure the PC has an Internet connection.
1. Connect one end of the USB cable to the USB port of PC, and
the other end to the tool.
2. If a newer version is found, a screen similar to Figure 7-6 will
appear.
3. Press [OK] to configure this tool as a USB device. See Figure
7-7.
18
Ultrascan OBDCAN Series User's Manual
Figure 7-5
Figure 7-6