Safety Precautions And Warnings - Topdon OBDCAN Serie Mode D'emploi

Disclaimer
• To take full advantage of the unit, you should be familiar with the
engine.
• All information, illustrations, and specifications contained in this
manual are based on the latest information available at the time
of publication. The right is reserved to make change at any time
without notice.

Safety Precautions and Warnings

To prevent personal injury or damage to vehicles and/or
Ultrascan OBDCAN series,
carefully and observe the following safety precautions at a minimum
whenever working on a vehicle:
• Always perform automotive testing in a safe environment.
• Do not attempt to operate or observe the tool while driving
a vehicle. Operating or observing the tool will cause driver
distraction and could cause a fatal accident.
• Wear safety eye protection that meets ANSI standards.
• Keep clothing, hair, hands, tools, test equipment, etc. away from
all moving or hot engine parts.
• Operate the vehicle in a well-ventilated work area: Exhaust gases
are poisonous.
• Put blocks in front of the drive wheels and never leave the vehicle
unattended while running tests.
• Use extreme caution when working around the ignition coil,
distributor cap, ignition wires and spark plugs. These components
create hazardous voltages when the engine is running.
• Put the transmission in P (for A/T) or N (for M/T) and make sure
the parking brake is engaged.
• Keep a fire extinguisher suitable for gasoline/chemical/ electrical
fires nearby.
• Don't connect or disconnect any test equipment while the ignition
is on or the engine is running.
• Keep this tool dry, clean, free from oil/water or grease. Use a mild
detergent or a clean cloth to clean it if necessary.
Ultrascan OBDCAN Series User's Manual
please read this user's manual first
EN
the
I