Replacing Activated Charcoal Filter - Faber LEVE24SS200 Instructions D'installation

REPLACING ACTIVATED CHARCOAL FILTER

The Activated Charcoal Filters are not washable and cannot be regenerated, and must be
replaced approximately every 4 months of operation, or more frequently with heavy usage.
Contact Faber for more information on the replacement charcoal. DO NOT rinse, or put charcoal
1
Pull down on the center of the front edge of the filter. The filter will then slip out of
2
the retaining tabs on the back. To replace, Slip the back edge of the filter into the
retaining tabs and push the front edge up until it snaps into place.
X
X
.
29