USRobotics USR5418 Guide D'installation Rapide page 17

English
User Guide
"Configuration" in the on the USRobotics Installation
CD-ROM.
The USRobotics Installation CD-ROM did not automatically
start when I inserted the Installation CD-ROM.
Solution
Some programs may keep the auto-run feature of the USRobotics
Installation CD-ROM from beginning. Close any open applications
and re-insert the CD-ROM. If your CD-ROM still does not automati-
cally start, click Windows Start > Run and type D:\setup (if your
CD-ROM drive uses a different letter, type that letter in place of
"D") and click OK.
I accidentally clicked Cancel during the installation procedure.
Solution
Remove and re-insert the USRobotics Installation CD-ROM into
your CD-ROM drive. Repeat the installation procedure of the soft-
ware before you install any hardware.
My computer does not recognise the USRobotics Wireless PCI
Adapter.
Solution
The PCI adapter may not be properly connected. Make sure the PCI
adapter is fully seated into the connector on your computer.
Solution
Install the PCI adapter in another PCI slot on your computer.
13