USRobotics USR5418 Guide D'installation Rapide page 16

English
complete this ping, refer to the troubleshooting information
for your wireless router or access point.
7. Type Ping followed by the LAN IP address of your "Default
Gateway" to check the communication with your gateway
(wireless router).
Note: Before performing Step 8. and Step 9. collect your gate-
way's WAN information, including the gateway's WAN IP
address and the DNS server address.
8. Type Ping followed by the WAN IP address of your gateway.
This is the address that is provided either by your ISP or by the
outside LAN. This procedure will ensure that you have access
to the Internet.
9. Type Ping followed by your known DNS server address. This
will allow you to resolve valid Internet host names (such as
usr.com) to IP addresses and to verify that you can browse the
Internet.
Security is enabled on my Wireless Router or Access Point and
my USRobotics Wireless PCI Adapter cannot connect.
Solution
The PCI adapter supports WEP (open and shared, 64 and 128 bit),
WPA, and WPA2 encryption. Verify that all of the security features
you have entered for the profile of your PCI adapter match the set-
tings for your wireless router or access point. For more information
about setting up connection profiles and security features, refer to
12