Troubleshooting - USRobotics USR5418 Guide D'installation Rapide

English

Troubleshooting

If you have any difficulties using your USRobotics Wireless PCI
Adapter, check the following issues to see if they apply to your sit-
uation.
Windows could not locate the software for the USRobotics
Wireless PCI Adapter.
Solution
The software must be installed before the PCI adapter is connected
to your computer. Click Cancel on the Found New Hardware Wizard
screen, remove the USRobotics Wireless PCI Adapter from your
computer, and perform the installation instructions.
I cannot connect to my wireless router or access point.
Solution
Check the USRobotics Wireless PCI Manager icon in the system
tray to confirm the connection status. If you are connected to your
wireless network device, the icon is green or yellow. If the icon is
red, open the Wireless PCI Manager and scan the area so that you
can connect to the correct wireless network.
Solution
Make sure the network name and security settings on your PCI
adapter match the settings on your wireless router or access point.
9