Changing The Engine Oil - Wacker Neuson GP2500A Manuel D'utilisation

GP
5.3

Changing the Engine Oil

Procedure 1. Drain the oil while the engine is still warm.
2. Remove the oil filler plug (a) and the drain plug (b) to drain the oil.
Note: In the interests of environmental protection, place a plastic sheet and a
container under the machine to collect any liquid that drains off. Dispose of this
liquid in accordance with environmental protection legislation.
3. Install the drain plug.
4. Fill the engine crankcase with the recommended oil up to the level of the plug
opening (c). See Technical Data for oil quantity and type.
5. Install the oil filler plug.
WARNING
Most used oil contains small amounts of materials that can cause cancer and other
health problems if inhaled, ingested, or left in contact with skin for prolonged
periods of time.
► Take steps to avoid inhaling or ingesting used engine oil.
► Wash skin thoroughly after exposure to used engine oil.
wc_tx004574gb.fm
a
c
b
wc_gr010582
45
Maintenance