Maintenance; Maintaining The Emission Control System; Periodic Maintenance Schedule - Wacker Neuson GP2500A Manuel D'utilisation

Maintenance

5 Maintenance
5.1

Maintaining the Emission Control System

For machines sold in North America:
Normal maintenance, replacement, or repair of emission control devices and
systems may be performed by any repair establishment or individual; however,
warranty repairs must be performed by a dealer/service center authorized by
Wacker Neuson. The use of service parts that are not equivalent in performance
and durability to authorized parts may impair the effectiveness of the emission
control system and may have a bearing on the outcome of a warranty claim.
5.2

Periodic Maintenance Schedule

The table below lists basic machine maintenance. Tasks designated with check
marks
points  require special training and equipment.
Check the fuel level.
Check the engine oil level.
Inspect the air filter. Replace as needed.
Check external hardware.
Clean the air cleaner element.
Inspect the shockmounts for damage.
Change the engine oil.
Clean the sediment cup or fuel strainer.
Check and clean the spark plug.
Check and adjust the valve clearance.
1
Clean the fuel tank.
Check condition of the fuel lines.
Replace when necessary.
1
Service more frequently in dusty conditions.

may be performed by the operator. Tasks designated with square bullet
1
1
Daily After
before first
starting 20 hr





44
Every Every
50 hr 100 hr





wc_tx004574gb.fm
GP
Every
300 hr


