CONSOLE AND REMOTE CONTROL
Display of the console
Display indicators
DIS
Shows the distance.
CAL
Shows the calories.
TIME
Shows the time.
PULSE
Shows the pulse.
SPEED
Shows the speed.
STEP
Shows the steps.
Key functions
START/
Press the button to start the Treadmill when it is stopped.
PAUSE
Press the button while the Treadmill is running to stop it.
Time, distance and calories will be stored. Press the button
again to restart the Treadmill and resume the speed before
stopping. Calories, time and distance will continue to count.
STOP
While running, if the treadmill is paused or stopped, press the
STOP button to stop the treadmill and reset all data.
+/-
Increase and decrease speed button. The two buttons were
used to adjust the parameters of the treadmill when stopped
and the speed while running. Increase or decrease the speed
faster by pressing and holding the buttons for more than 1
second.
EN
Remote control
31