Warranty Conditions; Conditions And Limitations; Exceptions; Liability - Lofrans IRIS II Manuel D'installation Et D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

www.lofrans.com

8 WARRANTY CONDITIONS

Lofrans warrants that in normal use and observing the maintenance schedules, the product is covered by warranty for a period of 3
years from the date of purchase by the original purchaser, without prejudice to the conditions, limitations and exceptions listed below.
Any product that proves defective in normal use during said period shall be repaired or replaced, as Lofrans chooses.

8.1 Conditions and limitations

- Lofrans does not assume any responsibility for an incorrect choice of product made by the purchaser.
- The responsibility of Lofrans shall be limited to the repair or replacement of all parts of the product that originally present material and/
or manufacturing defects.
- Lofrans shall not in any way be liable for faults or any consequent damage originating from:
- use of the product in applications for which it was not designed;
- corrosion, degradation caused by ultraviolet rays and wear;
- failure to follow the maintenance schedule;
- incorrect or unsuitable product installation;
- any modification or alteration of the product;
- conditions of use exceeding the product specifications.
- The warranty does not cover the additional costs borne for interventions, removal, transport and installation of the product;
- The warranty is cancelled if maintenance is carried out by people not authorised by Lofrans.
- Lofrans products are designed to be used only in the marine environment. Lofrans does not assume any
responsibility deriving from other uses.
- Lofrans reserves the right to not acknowledge this warranty if the electromechanical products are operated by unsuited
electrical accessories and/or in the case of failure to install an appropriate overload cutout switch on the electric power line.

8.2 Exceptions

Coverage under warranty is limited to a period of 2 years from the date of purchase by the original purchaser for:
- Electrical or electronic control equipment
- Control box and contactors
- Overload cutout switches
Coverage under warranty is limited to a period of 1 year from the date of purchase by the original purchaser for:
- Electric motors
- Electrical boards
- Gaskets and seals
- All the products used on charter boats.

8.3 Liability

This warranty does not cover any loss or damage caused to the purchaser by the ascertained non-conformity of the product, except for
the case of fraud or gross negligence of Lofrans declared with a court ruling.
Some states and countries do not allow the exclusion or limitation of incidental or consequential damages, so the above-stated
limitations or exclusions might not be applicable.

8.4 Procedure

The warranty application must be notified to Lofrans website http://www.lofrans.com/warranty.php by filling all the necessary
fields, including the serial number of the control.

8.5 Termination clause

If any clause of this warranty is invalidated by a judge or other competent authority, the validity of the remaining clauses of this warranty
and the rest of the clause in question will not be affected.

8.6 Conformity

This warranty is governed by the laws and in conformity with Italian laws.
The Court of Milan has jurisdiction over all disputes.
UK
11

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Iris

Table des Matières