Check Menu; Measurement Reset - Lofrans IRIS II Manuel D'installation Et D'utilisation

www.lofrans.com

4.9 Check menu

Tests
Software Version
Operat. Time
Sensor Test
LCD Test
E x i t
5 USE
Press the (ON) key to activate controls and to switch on the display lighting. The
display lighting switches off 30 seconds after the last command given (adjustable
default time – see "Light Time").
(UP) to control the anchor ascending
Press key
Press key (DOWN) to cast anchor
When any key is released (UP or DOWN) the corresponding action is stopped.
Use the (DOWN) or
Software Version
Indicates the version of the software installed.
Operation Time
Indicates the time the instrument operates
Sensor Test
The purpose of this function is to check the state
5
of the sensor:
0
LCD Test
This function switches on all the display's pixels
thus making it possible to perform a check on
them.
Exit
To return to the settings menu.
(UP) key to move around the parameters
contact open
contact closed
V=11.6 Vdc
V=11.6 Vdc
Select with
Sensor Test
Sensor Test
Confirm with
Select with
Confirm with
Confirm with

5.1 Measurement reset

Measurement reset can be performed
in the Measurement menu by selecting
"Yes" in the Reset Measure row.
Measure
O f f
R e s e t M e a s u r e N o
U n i t s F e e t
E x i t
UK
9