Signature SCA2605XNF Manuel D'utilisation page 56

Installing the handles
This appliance has been built with external handle, which
is in poly bag. Please follow instruction below to install
them:
1. Remove two screws(8) by a cross screwdriver.
2. Take out the handles(9) and fix it with the two
screws(8).
3. Cover the two screws(8) with two caps(10). The caps
are in a small poly bag together with the handles.
8
Figure 1
Figure 1: Front view without handles
Figure 2: Exploded view of installing the handles
Figure 3: Front view with handles
10 8
9
Figure 2
-54-
Figure 3