Test; Display Controls - Signature SCA2605XNF Manuel D'utilisation

TEST

Clean the parts of the appliance with lukewarm water on
a soft cloth or with a neutral detergent and with clear
water, then wipe them dry.
Notes: Electric parts of the appliance can only be wiped
by dry cloth.
The electronic control panel default temperature setting
displays -18°C when turn on electricity, compressor begin
to work, open the door and the light is on, it means LED
light is normally working.
Close the door and wait 30 minutes. If the temperature in
the freezer compartment decreased obviously, it shows
that the appliance system works well. When the
appliance operates for a period of time and the door is
not too often opened, will begin automatic circulation
when system temperature reaches the set temperature,
appliance always keep temperature about set value.
If the above steps are successful, the trial operations are
finished. The appliance works normally.

DISPLAY CONTROLS

Use your appliance according to the following control
regulations, your appliance has the corresponding
functions and modes as the control panels showed in the
pictures below. When the appliance is powered on for the
first time, the display panel turns on but all buttons are
locked. The default temperature setting is -18°C. If no
buttons have been pressed and the doors are closed, the
display will turn off.
-42-