Signature SCA2605XNF Manuel D'utilisation page 45

Controlling the temperature
We recommend that when you start your appliance for
the first time, the temperature is set to -18°C. If you want to
change the temperature, follow the instructions below.
Caution! When you set a temperature, you set an average
temperature for the whole freezer cabinet. Temperatures
inside each compartment may vary from the temperature
values displayed on the panel, depending on how much
food you store and where you place them. Ambient
temperature may also affect the actual temperature
inside the appliance.
Press the " " for 3 seconds to unlock the buttons. The
display starts to flash. Press "+" and "-" to set the
temperature between -15°C and -25°C as needed, and
control panel will display corresponding values. After 10s,
the display stops flashing and the buttons are locked with
a sound. The setting takes effect. After another 10s, the
display turns off.
It's suggested to set -18°C for daily use.
-43-