Charger Indicator - Etac Molift Air 200 Mode D'emploi

Masquer les pouces Voir aussi pour Molift Air 200:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 66
Molift Air / www.etac.com
Service scope
Service involves replacing the lifting belt and inspection/
replacement of worn parts. This must be carried out by author-
ized personnel. Service is needed when the service light is red
(calculated 5.000 lifts in weight class 2). Contact Etac your local
dealer, or see etac.com for a recommendation of an approved
service partner.
Charging
Molift Air can be charged through the hand control with a bat-
tery charger, or through the rail with In Rail Charging.
Indicator on charger and power supply indicator

Charger indicator

Green flash
Yellow
Yellow flash
Green
Power supply indicator Mode
Blue
Hand control charging
The battery charger is plugged into a power outlet. Wall-mounted
docking for hand control is available. Make shure not to damage
the cable. The charger can be connected to the power outlet
at all times. Use only Molift chargers. The Hand control has an
indicator light that will illuminate when battery level is low and
the lifter requires charging.
Charger for Molift Air hand control: Art. no.: 2540100
Battery indicator
Hand Control
Wall Mounted Docking
Charging cable
Mode
Not connected to hoist
Charging
Top of charge
Fully charged
Connected to power
outlet
IRC - In Rail Charging (only for Molift Air 350)
The lifter is charged through a built in charger in lift motor for
continuous charging through the entire rail system length.
Molift Air IRC has a built in charger, connected to the battery. It
must be installed with IRC Trolley in a rail system with a conduc-
tive tape. The IRC trolley is connected to the battery charger
inside the Molift Air IRC. The IRC trolley is always in contact with
the the conductive tape inside the rail. The IRC power supply is
connected to the conductive tape through IRC connection at the
end of the rail, and supplies power to the battery charger inside
Molift Air IRC.
Trolley
IRC
IRC fits both Single rail and Traverse systems.
Trolley
IRC
IRC connection RH62
connected to IRC power supply
IRC Power Supply
Art. no.: 2510119
Charger 3844 DC/DC (Part of Molift Air IRC)
Art. no.: 2640101
7
Conductive
Tape
IRC connection RH62
connected to IRC power supply
Conductive
Tape
Traverse
trolley IRC
IRC connection RH112
Connected to
traverse trolley
Conductive
Tape

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Molift air 350

Table des Matières