Maintenance And Cleaning; Technical Data - Speaka Professional 1000168 Mode D'emploi

• If required you can connect additional devices to the USB/HDMI inputs PC2 (16, 17), PC3
(18, 19) and PC4 (20, 21).
• If required you can connect a USB peripheral device to the USB peripheral device port (3).
• Connect the hollow plug from the power adapter to the power connection 5 V/DC, 2 A (23).
• Connect the power adapter to a wall socket.
• Connect the first device to the power supply and turn it on. Wait until the device is operational.
Make sure that the keyboard and the mouse function properly. If they do not, turn off all
devices and repeat the steps for connection above.
• After you successfully connect the first device, push the Select key (13) and turn on the
second device. Wait until the device is operational and verify that the keyboard and mouse
function properly.
• Repeat these steps to turn on the additional devices.
• Push the Select key on the product to switch between connected devices during use.
One of the blue status LEDs (9, 10, 11, 12) shows which channel (PC1 to PC4) is active.
• Push the Audio ON/OFF key (7) to activate/deactivate the microphone input and headphone
output. The corresponding green audio LED (6) lights up when both jacks are activated.
Keyboard shortcut
For your convenience, the product supports keyboard shortcuts for certain functions. Below
table lists available shortcuts and their corresponding functions.
Command
[Scroll Lock] ++ [Scroll Lock] + [1/2/3/4]
[Scroll Lock] ++ [Scroll Lock] + [→ or ↓]
[Scroll Lock] ++ [Scroll Lock] + [← or ↑]
[Scroll Lock] ++ [Scroll Lock] + [B]
[Scroll Lock] ++ [Scroll Lock] + [S]
[Scroll Lock] ++ [Scroll Lock] + [S] + [n]
[Scroll Lock] ++ [Scroll Lock] + [K]
[Scroll Lock] ++ [Scroll Lock] + [R]
[Scroll Lock] ++ [Scroll Lock] + [ESC]
[Scroll Lock] ++ [Scroll Lock] + [N]
[Scroll Lock] ++ [Scroll Lock] + [T]
Function
Switch to PC1/PC2/PC3/PC4
Switch to next PC.
Switch to previous PC.
Turn the beep sound on and off.
Auto-scan mode every 5 seconds.
Press [Esc] to return to regular key code.
Set automatic scan time.
Use number keys to set.
Valid range:
5-999S (N is any number between 5 and 999)
Turn hotkeys on and off.
Reboot
Restore to factory default settings.
View the firmware version and display the
version number with a flashing indicator.
Turn auto-detection on and off.

Maintenance and cleaning

• Before cleaning, disconnect the product from the connected devices and unplug it from the
power outlet.
• There are no components located inside the product you need to maintain. Never open/
dismantle the product.
• Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as
they can cause damage to the housing and malfunctioning.
• To clean the product, a dry, soft and clean cloth is sufficient. Do not apply too much pressure
to the housing as this may cause scratch marks.
• You can easily remove dust using a long-haired, soft and clean brush.
Disposal
a) Product
Electronic devices are recyclable waste and must not be disposed of in the
household waste. At the end of its service life, dispose of the product according to
the relevant statutory regulations.
Remove any inserted (rechargeable) batteries and dispose of them separately from
the product.
b) (Rechargeable) batteries
You as the end user are required by law (Battery Ordinance) to return all used
batteries/rechargeable batteries. Disposing of them in the household waste is
prohibited.
Contaminated (rechargeable) batteries are labelled with this symbol to indicate that
disposal in the domestic waste is forbidden. The designations for the heavy metals
involved are: Cd = Cadmium, Hg = Mercury, Pb = Lead (name on (rechargeable)
batteries, e.g. below the trash icon on the left).
Used (rechargeable) batteries can be returned to collection points in your municipality, our
stores or wherever (rechargeable) batteries are sold.
You thus fulfil your statutory obligations and contribute to the protection of the environment.

Technical data

a) HDMI KVM switch
Inputs ............................................ 3 x USB-A
4 x HDMI-A & USB-B
1 x 3.5 mm jack socket (microphone)
Outputs ......................................... 1 x HDMI-A
1 x 3.5 mm jack socket (headphones)
System requirements .................... Windows
XP (Home, Pro, with SP1, SP2, SP3, only 32 bit)
Vista™ (32/64 bit), 7 (32/64 bit), 8, 8 Pro, Enterprise
Mac OS X 10.8
Linux Kernel 2.6.x
Resolution ..................................... 480p, 720i, 720p, 1080i, 1080p
UXGA 1920 x 1200, 4K60Hz
USB standard ............................... 2.0
Compatibility ................................. HDMI2.0, HDCP2.2
Operating conditions ..................... 0 to +40 ºC, 20 – 90 % RH (non-condensing)
Storage conditions ........................ -20 to +60 ºC, 20 – 90 % RH (non-condensing)
Cable length ................................. 1.7 m each (USB-A: 30 cm, USB-B: 10 cm)
Dimensions (W x H x D) ............... 270 x 32 x 111 mm
Weight .......................................... 770 g
b) Power adapter
Input voltage / current ................... 100 – 240 V/AC, 50/60 Hz, max. 0.5 A
Output voltage / current ................ 5 V/DC, 2 A
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
Copyright 2021 by Conrad Electronic SE.
®
*1000168_v10_1221_02_jh_m_en