Rear Suspension Leverage; Tyres - Beta Motorcycles RR 125 LC Mode D'emploi

4
40Nm
60Nm
40Nm

TYRES

Only fit tyres approved by BETAMOTOR.
Unsuitable tyres can adversely affect the road holding of the vehicle.
• To protect your safety, immediately replace any damaged tyres.
• Slick tyres adversely affect the road holding of the vehicle, especially on wet roads
and in off-road riding.
• Insufficient pressure results in abnormal wear and overheating of the tyres.
• The front and rear tyres must have the same tread design.
• Always measure the inflating pressures when the tyres are cold.
• Keep the tyre pressures within the prescribed range.
EN
REAR SUSPENSION
LEVERAGE
In order to guarantee optimal operation
and duration over time of the progressive
leverage of the rear suspension, it is rec-
ommended to periodically check correct
tightness of nuts and bolts.
Verify that suspension nuts and bolts are at
the indicated torque.
25Nm
52