Rear Suspension Leverage - Beta Motorcycles RR 350 Mode D'emploi

4
70Nm
90Nm
70Nm
GB
50Nm
10Nm
90Nm
Compress and release the fork 3-4 times.
Tighten the wheel bolt and the screws of
the foot-leg.
WARNING:
Tightening of the screws should be
carried out by adjusting the torque
wrench to the stability torque with
repeated tightening until stability
torque has been achieved.
REAR SUSPENSION
LEVERAGE
In order to guarantee optimal operation
and duration over time of the progressive
leverage of the rear suspension, it is rec-
ommended to periodically check correct
tightness of nuts and bolts.
Verify that suspension nuts and bolts are at
the indicated torque.
60